compressing stress中文是什么意思

• 压缩应力
• 压应力

• "compress"中文翻译    vt. 压缩，浓缩；使(文章等)变简练。 vi. 经受压 ...
• "stress"中文翻译    n. 1.压力，压迫，紧迫，紧张。 2.【语音】重音；重 ...
• "compressing" 中文翻译 :    压缩加工
• "compressing and expanding" 中文翻译 :    压缩与扩张
• "compressing apparatus" 中文翻译 :    压紧装置
• "compressing bandage" 中文翻译 :    压迫绷带
• "compressing barrier" 中文翻译 :    压缩阻片
• "compressing box" 中文翻译 :    压捆室
• "compressing cabin" 中文翻译 :    加压舱
• "compressing components" 中文翻译 :    压缩部分（气缸部分）
• "compressing curve" 中文翻译 :    压缩曲线
• "compressing cycle" 中文翻译 :    压缩周期
• "compressing cylinder" 中文翻译 :    压缩缸
• "compressing flow" 中文翻译 :    压缩流动
• "compressing force" 中文翻译 :    压缩力
• "compressing machine" 中文翻译 :    压缩机, 压紧
• "compressing mechanism" 中文翻译 :    压缩机构; 压制机构; 压制机械
• "compressing pump" 中文翻译 :    压送泵; 增压泵
• "compressing ratio" 中文翻译 :    压缩比
• "compressing roll" 中文翻译 :    压实辊
• "compressing rubber" 中文翻译 :    压缩橡皮
• "compressing spring" 中文翻译 :    压缩弹簧
• "compressing strain" 中文翻译 :    压缩应变
• "compressing strength" 中文翻译 :    抗压强度
• "compressing switch" 中文翻译 :    压缩开关

• The optimal processing parameters are as following : the compressing stress is looompa , powder size 100 - 120 mesh , the ratio of magnetic powder and adhesive reagent 2 . 5 : 100
  粘结磁体的最佳工艺条件为：成型压强1000mpa 、磁粉粒度在100 120目左右、粘接剂的含量为2 . 5g 100g磁粉。
• 6 ) horizontal braces force of horizon that results from tension . therefore , it reduces pre - compress stress . horizontal braces is stronger , it ' s influence is more important
  （ 6 ）横向约束的存在减弱了张拉在框架梁中形成的轴向力，从而减小在框架梁中预压应力，横向约束越强，它的影响就越大。
• As well , the compress stress existed in ( 002 ) crystal plane are found and can be explained by the matching between film material and substrate material as well as the different thermal expand coefficient between them
  同时， zno薄膜( 002 )方向上存在着内应力，内应力是由膜材料与基底材料之间的晶格失配和不同热扩散系数造成的，退火可可使内应力的到不同程度的释放。
• The ground stress distribution within southern margin of junggar basin assumes that its compressing stress increases vertically with depth and compatible with the structural layers ， which can be divided into deep compressive belt ， medium shear zone and shallow tensile fracture belt
  盆地南缘区域地应力分布规律表现为纵向上压应力随深度增加而增大,并与构造层配伍,可分为深层挤压带、中层剪切带、浅层张裂带。
• The test results show that the out - of - plane compressive property of 3d woven composite are rate sensitive . the elastic modulus is n ' t increased with the rising of strain - rate , however , the maximum compress stress and strain of 3d woven composite increase from 228mpa to 272mpa , from 15 % to 20 % as the strain rate increases from 2000 / s to 3000 / s
  实验结果表明，三维机织玻璃纤维复合材料在面外力学性能上是应变率相关的，随着应变率的增大，冲击压缩初始模量基本不变，但最大应力和最大应变都明显增加。
• The main causes , which have effects on redistribution of internal force in the prestressed frame , including the relative height compressive zone of section , secondary moment and types of load applying are taken into account . the horizontal braces force which results from the tension of the prestressing steel , reduces the pre - compress stress is analyzed
  并且探讨了各影响因素对框架梁截面延性的影响和由于柱的抗侧刚度在预应力钢筋张拉时约束梁的轴向变形，从而影响预应力在梁中的建立所造成的梁中轴向预压力的损失。